PythonQt

Qter

https://www.cnblogs.com/xia-weiwen/p/7932379.html

在Qt(C++)中与Python混合编程，可以使用PythonQt库。

网站首页：

http://pythonqt.sourceforge.net

下载页面：

https://sourceforge.net/projects/pythonqt/files/

Qter

http://pythonqt.sourceforge.net/Building.html
PythonQt requires at least Qt 4.6.1  and Python 2.6.x/2.7.x or Python 3.3.
To compile PythonQt, you will need a python developer installation which includes Python's header files and the python2x.[lib | dll | so | dynlib].
The recommended way to build PythonQt is to use the QMake-based *.pro file. The build scripts a currently set to use Python 2.6. You may need to tweak the build/python.prf file to set the correct Python includes and libs on your system.

On Linux, you need to install a Python-dev package. If Python can not be linked or include files can not be found, you probably need to tweak build/python.prf

To build PythonQt, just do a:

> cd PythonQtRoot
> qmake
> make all
The tests and examples are located in PythonQt/lib. You should add PythonQt/lib to your LD_LIBRARY_PATH so that the runtime linker can find the *.so files.

以下是deepin 15下的编译
https://sourceforge.net/projects/pythonqt/
下载PythonQt3.2解压后，执行如下命令

> qmake
> make all

/usr/bin/ld: 找不到 -lpulse-mainloop-glib
/usr/bin/ld: 找不到 -lpulse
解决：
sudo find / -name libpulse.so*
然后cp /usr/lib/x86_64-linux-gnu/libpulse.so. /usr/lib/libpulse.so

sudo find / -name libpulse-mainloop-glib.so*
选择其中一个执行cp /usr/lib/x86_64-linux-gnu/libpulse-mainloop-glib.so.0.0.5 /usr/lib/libpulse-mainloop-glib.so


编译完成后，结果都生成在PythonQt3.2/lib/　中
这里启动程序，报如下错误：
PythonQtTest: error while loading shared libraries: libPythonQt-Qt5-Python2.7.so.3: cannot open shared object file: No such file or directory


添加 PythonQt/lib　路径到 LD_LIBRARY_PATH 变量中
vi ~/.bashrc
添加　export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/PythonQt3.2/lib
. ~/.bashrc

Qter

参考测试用例，创建自己的项目
由于相关路径没有包含，参考示例，把相关配置信息添加到 .pro文件中

1. include (./build/PythonQt.prf )
   
2. include (./build/PythonQt_QtAll.prf )
   
3. 
   
4. INCLUDEPATH +="/home/hechengjin/program/PythonQt3.2/src"
   
5. INCLUDEPATH +="/home/hechengjin/program/PythonQt3.2/extensions/PythonQt_QtAll"
   
6. INCLUDEPATH +="/usr/include/python2.7"

复制代码

另外还会报　 No module named requests

由于机器上把requests安装在dist-packages目录中，如：/usr/lib/python2.7/dist-packages
所以找不到，下载安装包，放到python2.7同级目录中
下载地址 https://www.lfd.uci.edu/%7Egohlke/pythonlibs/

requests‑2.18.4‑py2.py3‑none‑any.whl  找这个文件，下载后，.whl改为.zip

把requests和requests-2.18.4.dist-info都放到/usr/lib/python2.7目录下
修改文件权限：
chmod -R 777 requests/
chmod -R 777 requests-2.18.4.dist-info/


再次执行自己的程序，报："No module named urllib3"

同样的方法下载　urllib3‑1.21.1‑py2.py3‑none‑any.whl

# chmod -R 777 urllib3/
# chmod -R 777 urllib3-1.21.1.dist-info/

"No module named chardet"
chardet‑3.0.4‑py2.py3‑none‑any.whl

chmod -R 777 chardet/

"No module named certifi"
certifi-2018.1.18-py2.py3-none-any.whl
"cannot import name utils"  from . import utils 不知道在哪个文件中可以用 sudo pip install utils
utils-0.9.0-py2.py3-none-any.whl
https://pypi.python.org/pypi/utils/0.9.0#downloads
chmod -R 777 utils/

也不是上面这个，而是当前requests下的/usr/lib/python2.7/requests/utils.py
把　INCLUDEPATH +="/usr/lib/python2.7/requests"　也加入到 .pro文件中
也不对
....

Qter

QT使用PythonQt添加输出

1.     PythonQt::init();
   
2.     pyq=PythonQt::self();
   
3.     pyMainModule = pyq->getMainModule();
   
4.     // connect output signals
   
5.     connect(pyq,&PythonQt::pythonStdOut, this, &MainWindow::qcout);
   
6.     connect(pyq,&PythonQt::pythonStdErr, this, &MainWindow::qcout);

复制代码

初始化之后添加connect，同时添加一个自定义的槽用于承载显示

注意connect中使用Python::self()会导致connect无效，需要自己定义一个PythonQt指针

1. public slots:
   
2.     void qcout(const QString& qs);

复制代码

https://blog.csdn.net/my393661/article/details/79327210